Cart
| Coad | 670535 | Material | 6061-T6 Aluminum Alloy | |
| Type | 45-Degree Mounting Optical Mount | Adjuster Specification | M5 x 2 | |
| Optical Component Diameter (mm) | 25.40 | Optical Component Thickness | 3.0mm（MIN） | |
| Pitch/Yaw Adjustment Range (°) | ±2.5 | Surface Treatment | Black Anodized | |
| Pitch/Yaw Adjustment Accuracy（mm/turn） | 0.25 | Accessories Included | 2.0mm Hex Wrench x 1 | |
| Optical Component Mounting Method | Secured with Nylon-Tipped Set Screws and Dual-Line Structure | Cage Rod Mounting Method | Threaded Hole |
LBTEK offers both fixed and adjustable 45-degree mounts, enabling 90-degree beam deflection. The 45° fixed mounts are available in three standard sizes: Ø12.7 mm, Ø25.4 mm, and Ø50.8 mm. In addition, mounts for elliptical optics (long axis 35.9 mm, short axis 25.4 mm) and off-axis parabolic mirrors are also available. The fixed mounts are compatible with standard O-type mirror mounts, while the cage system 45-degree mounting mounts are compatible with 30 mm and 60 mm cage systems.
LBTEK Cage System Right-Angle Mount AMCB-1B is designed for 30 mm cage systems, allowing sliding adjustment within the cage. It provides ±2.5° pitch and yaw adjustment with a resolution of 0.95° per turn. The through-hole accommodates Ø25.4 mm optical elements with a minimum thickness of 3 mm.
Note: When adjusting within the cage system, care must be taken not to over-tighten the adjusters. The pitch and yaw should remain within ±2.5°; exceeding this range may cause interference between the mount and the cage system, resulting in reduced adjustment accuracy.
Product evaluation
%High praise
There are comments