Cart
| Coad | 670473 | Material | 316L Stainless Steel | |
| Type | 0.5-inch Stainless Steel Optical Mount | Pitch/Yaw Angle | ±5° | |
| Optical Component Diameter (mm) | 12.70 | Optical Component Thickness | 2.0mm（MIN） | |
| Optical Component Mounting Method | Flexure Plate and Set Screw | Adjustment Accuracy | 0.65° / turn | |
| Adjuster Specification | 2 × M4×0.2 Knobless Precision Adjustment Screws with Locking Nuts | Countersunk Hole Specification | M4 x 2 | |
| Optical Axis Center Height (mm) | 12.70 | Maximum Linear Translation in Z Direction | - | |
| Locking Nut Compatible (Yes/No) | - | Thread Locking Method | - | |
| Surface Treatment | Sandblasting | Included Wrench | 2.0mm Hex Key x 1 and 1.5mm Hex Key x 1 | |
| Included Screws | 2 × M4×10 Hex Socket Ultra-Thin Head Screws | |||
LBTEK 0.5-inch MT High-Stability Series Optical Mount is designed for holding Ø12.7 mm optical components. It supports both left- and right-handed installation and provides superior long-term alignment stability compared to standard optical mounts. Optical components can be secured using flexure plates with fixing screws or alternatively with retaining rings. Equipped with M4×0.2 precision adjusters, the mount offers an angular adjustment range of ±4° or ±5°.
LBTEK 0.5-inch Stainless Steel Mirror Mount is designed for holding Ø12.7 mm optical components and is equipped with two knobless M4×0.2 precision adjusters with locking nuts. The locking nuts are 6 mm hex nuts and can be adjusted using the MT-TW6 torque wrench. Optical components are secured by flexure plates and fixing screws, with a minimum allowable thickness of 2 mm. The two knobless M4×0.2 precision adjusters with locking nuts allow pitch and yaw adjustment of the optical element via a hex wrench. The mount body is equipped with M4 countersunk mounting holes. Each LBTEK stainless steel mirror mount is supplied with ultra-thin hex socket screws and a matching hex wrench.
Product evaluation
%High praise
There are comments