Cart
| Code | 667222 | Type | Adjustable Adapter | |
| Material | 6061-T6 aluminum alloy | Surface treatment | Black anodizing | |
| Applicable optical component size | Ø12mm | Optical component fixing method | M4 set screw | |
| Included wrench specification and quantity | 1 piece of 2.0mm hex wrench | Pitch/yaw angle | ±5° | |
| Outer diameter, through hole specification | Ø25.4mm, Ø12mm | Adjustment accuracy | 1.13°/turn | |
| Adjuster specification/quantity | No-knob M4×0.25 precision adjuster/2 pieces |
Suitable for Ø12 mm cylindrical components
±5° pitch/yaw adjustment
Adjustment accuracy: 1.13°/turn
Ø25.4 mm optical wall
The LBTEK Adjustable Adapter TAD12KT is designed to mount Ø12 mm cylindrical components, commonly used to hold fiber collimators. It offers ±5° pitch/yaw adjustment, and the Ø25.4 mm optical wall is compatible with mounting components with a Ø25.4 mm inner hole, such as when used with COPM1B for a 30 mm coaxial system. The two M4×0.25 precision adjuster screws on the front plate control pitch and yaw, adjustable with the included 2.0 mm hex wrench. The front plate has pitch and yaw axis markings and two holes for the adjustable wrench OWR-U.
Note: When adjusting the M4 precision adjuster screws, it is recommended to use within the adjustable ±5° range. To prevent the precision adjuster screws from being screwed in too deep and causing detachment from the outer mounting ring, ensure the depth between the outer mounting ring surface and the precision adjuster screw surface is ≤2 mm during adjustment.
Product evaluation
%High praise
There are comments