Cart
| Code | 665734 | Type | Electric Actuator | |
| Mounting Method | M6×0.25 Threaded Mounting | Motor Type | 2-Phase 2-Pole Stepper Motor | |
| Travel | 13mm | Bidirectional Repeatability | < 5µm | |
| Backlash | < 15µm | Return to Zero Position Accuracy | < 5µm | |
| Connector Type | DB 15 | Maximum Acceleration | 10mm/s² | |
| Maximum Thrust | 40 N | Maximum Speed | 2.0 mm/s | |
| Cable Length |
1.0m |
Non-rotating Drive Head
Manual Adjustment via Hand-Screw Located at the Rear
Compact Bipolar Stepper Electric Actuator, Retracted Length 74.6mm
Provides Threaded and Optical Wall Mounting Options
The SMET-13x series actuator provided by LBTEK has a sleek, compact design with a retracted length of 74.6 mm when fully retracted, offering smooth and precise linear motion control. The actuator is driven by a miniature two-phase bipolar stepper motor, with a maximum stepper speed of 2 mm/s. The actuator eliminates the rotating contact structure, and the top ball head does not rotate, reducing wear and friction and improving smoothness of movement. When the actuator is not powered on, it can be manually adjusted using the red hand screw located at the rear. This series of actuators offers two mounting options: M6×0.25 threaded and Ø8.6 mm optical wall mounting.
Note: The electric actuator does not support hot-swapping. Hot-swapping while powered may damage the motor. Also, rotating the hand screw while powered on may damage the electric actuator motor.
Product evaluation
%High praise
There are comments